153 UCW Clamp-on Sensors
It is designed for applications where a customer is unwilling or unable to cut into the process measurement line to install an in-line meter. Flow measurement up to 6000 mm can be done on metal and plastic pipes lined or unlined and with composite pipes having clean liquids.
- Small, Medium and Large Sensors to cover line sizes from 15 to 6000 mm.
- Installation without Process Interruption.
- Suitable for a wide range of pipe materials including lined pipes.
- Suitable for both conductive and non-conductive liquids.
- Accurate and Cost-Effective Measurement.
- Modular design offers better flexibility and ease of operation with high degrees of efficiency.
- Optional Heat Flow and Pressure Measurement.
| Power Supply | Std. - 85 - 230 VAC; Optional - 24 VDC |
| Measured Values | Volumetric Flow, Flow Velocity, Flow Direction, Speed of Sound, Quality of measured signal |
| Flow Velocity | 0 - 32 m/s bi-directional |
| Accuracy | ± 1%* for dia >= 50mm and v>0.5m/s |
| Repeatability | 0.30% |
| Sensors | Clamp-on: Small, Medium and Large Sensors to cover line sizes from 15 to 6000 mm. |
| Sensors – Temperature Range | 0 to 70°C, For high temperature up to 160 C, contact HO |
| Display | 2 Line backlight LCD |
| Keyboard | 4 X 4 Numeric Keyboard membrane |
| Pipe Materials | Mild Steel/ Carbon Steel, Stainless Steel, Cast Iron, Ductile Iron, PVC, Plastic* |
| Lining | Mortar, Tar Epoxy, Rubber |
| Outputs | 4-20 mA/ 0-20 mA; Relay output; Open Collector Frequency/ Pulse output |
| Communication | RS 485/ RS 232 with MODBUS (ASCII or RTU) |
| Inputs | Up to 3 Analog input channels and Up to 2 channel 3 Wire compensated Pt 100 |
| Data Logging | Built-in or optional PC based |
| Protection | IP 68 (Applicable for Converter & Clamp on Sensors both) |
- Potable Water
- Deionized / deminerilized water
- Cooling and heating water
- Broad range of hydrocarbons
- Purified Water
- Waste Water
- Sewage
- Discharge Water