Hydrostatic 103 HPT

Hydrostatic sensors provide Continuous level measurement in liquid applications using pressure sensors. The submersible probe consists of a measuring cell, two wire transmitters & a special cable with vent tube. The level signal is determined by the pressure difference between the water column over the probe & atmospheric pressure. They are used in tube wells & tanks, submersible or installed outside.
  • Submersible (IP68) Transmitter - Two Wire.
  • Highly accurate and long-term stable sensor element.
  • Compensated for Temperature and air pressure.
  • Stainless steel housing < 22mm>
  • Compact and easy to install.
  • No site calibration required.
  • Reliable.
  • Maintenance free.
Measuring Range Up to 20 m water column
Supply Voltage 12 V to 30 V DC
Output Signal 4 – 20 mA DC
Maximum Load 600 ohms @ 24 VDC
Operating temperature 0 to 70° C
Zero Pressure Offset (mA) 4.0 ± 0.2mA
Full Scale Span (mA) 16.0 ± 0.2mA
Repeatability ± 0.1% FSO
Max. Permissible Pressure 2 X rated Pressure.
Wetted Material Stainless Steel.
  • Level Measurement in Tube Wells / Storage Tanks.